Basic Knowledge About the Use of E-cigarettes

E-cigarettes are electronic products that can be used to reduce second-hand smoke, similar to the taste of cigarettes, but they are not real cigarettes, so there is basically no harm to the human body. However, many people will have some misunderstandings in the process of using, resulting in poor taste and even damage to the performance of e-cigarettes. The following is the basic use of e-cigarettes.

1. Put the heating rod into the charging box for charging, the green indicator light of the charging box starts to flash, and the charging status is displayed at this time.

2. For about 40 minutes, the green light stays on and no longer flashes. After a period of time, the indicator light will automatically turn off, and the energy is full at this time.

3. Press the metal key on the top of the shell, take out the heating rod, insert the ink cartridge into the heating rod, and insert it into the end. The finished wire and the edge of the heating rod opening on the ink cartridge are parallel.

4. Lightly press the heating rod switch with your finger, the green light flashes for about 2-3 seconds, release the finger of the electronic cigarette brand, the heating rod starts to flash and heat, and then about 20 seconds later, the heating rod will be steady green. Can be used normally.

5. It takes about 1 minute to smoke normally. When the heating rod lights up red, you can still smoke 1-2 bubbles and then go out.

During use, when the simulated burning cigarette butt on the front of the fuselage is obviously darkened, the special charger that comes with the machine should be used to charge the battery. When charging, please insert the battery in accordance with the positive and negative signs on the charger. Do not turn it upside down. After 3-4 hours of charging, when the charger indicator turns from red to green, it means that the battery is fully charged. Please remove the battery and disconnect the charger.

1. Please use an e-cigarette immediately after dripping. During use, do not repeatedly remove the cigarette holder and electronic cigarette holder (battery assembly) combination.

2. After finishing the liquid in the cigarette holder, take out the cigarette holder and the electronic cigarette holder (battery assembly) and then light a few drops of liquid.

Electronic cigarettes also need frequent maintenance after use, and some places need to be paid attention to. If you feel that you still have doubts about the use of e-cigarettes after reading the above content, you can contact us for a more comprehensive solution.

As a professional e-cigarette manufacturer, we have won praise and trust from many customers with our excellent technology and high-quality products. We have an experienced team and staff that can provide safe and high-quality products according to the diverse needs of customers. We also have a complete management team that can continuously optimize and adjust new solutions. If you are interested in our e-cigarettes, please contact us immediately!